These true mini, hardened Industrial communication devices are
designed for where critical but space-limited outdoor CAM enclosure.
They can be powered by wide range of VAC, VDC or external DC power
With its multi-purpose design, it can also be used for Din-Rail
or wall-mounted. It is an ideal unit for IP surveillance, traffic
monitoring and Security application in critical environment. It can
tolerate -40C to 85C in harsh environment to perform a reliable


> 10/100/1000 Mbps Ethernet BASE-T/TX to 100 3km SM SC

> Port supports Auto-Negotiation for 10/100 full duplex or half duplex data
> Optical port supports 100Mbps full duplex data
> Distances up to 160 km SM with optional SFPs
> Flexible power 18-46VAC / 12-60VDC

> Uses interchangeable SFP modules for fiber type, distance and connector
  ( SFP Model)
> Voltage transient protection on all power and signal input/output lines
   provides protection from power surges and other voltage transient events
> No in-field optical adjustments required
> LED indicators provided for confirming equipment
   operating status

> Exceeds TS2 Specifications


IEEE Standard: IEEE 802.3 10Base-T Ethernet, IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3u 100Base-FX Fast Ethernet, IEEE802.3x Flow Control and Back Pressure
Data Processing: Store and Forward
Flow Control: IEEE 802.3x Flow Control and Back Pressure
Architecture: Full wire speed conversion, Transparent conversion to 802.1Q VLAN
tagged packets
MAC address Table Size: 1K
Packet Buffer Size: 1Mbits
Network Connector : RJ-45 10/100M BaseT(X) , Auto negotiation, Auto MDI/MDI-X
function, Full/Half duplex, Fiber ports: Depends on model: 100BaseFX SC 30km or
SFP 100BaseX
LED indicators: Power, Speed, Link/Act, Speed (TP port), Link/Act(TP and Fiber port)
DIP Switch: Link Fault Pass Through (LFP), Converter Mode, Switch Mode
Power protection: Surge protection diodes on power input
Connector protection: ESD protection diodes on TX port
Reserve polarity protection: Present
Overload current protection: Present
Power Input: 18V-36VAC, 12V-60VDC, DC Jack terminal cable supported (DC Barrel
Conformance to UL Standards: Use Isolated power supply to conform with UL 508
Power Consumption: 1.44 Watts
Removable Terminal Block: 3 pin contact terminal block for power input
Operating Temperature: -40c to85c
Operating Humidity: 5% to 95% (Non-condensing)
Storage Temperature: -40 c to 85c
Housing Design: IP40 Design, high graded Aluminum
Case Dimension (W X D X H): 59x36x49mm (LxWxD)
Installation: DIN Rail mounted, Panel Mounted
EMI: FCC Part 15 Subpart B Class A, CE EN 55022 Class A
EMS: EN61000-4-2 (ESD) Level 3
EN61000-4-3 (RS) Level 2
EN61000-4-4 (EFT) Level 2
EN61000-4-5 (Surge) Level 2
EN61000-4-6 (CS) Level 2
EN 61000-4-8 (PFMF) Level 1
Safety: UL508 (Pending)
Rail Traffic: EN 50121-4 (Pending)
Shock: IEC 60068-2-27

Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Environmental: TS-2,RoHS, Reach

Models Available:

MC-100- C 100FX 30km SC
MC-100-SFP 100FX SFC port
MC-1000 10/100/1000
VC-100 VDSL Communications
its_express_rev_1.4_004019.jpg its_express_rev_1.4_004018.jpg its_express_rev_1.4_004017.jpg its_express_rev_1.4_004016.jpg its_express_rev_1.4_004015.jpg its_express_rev_1.4_004013.jpg
its_express_rev_1.4_004011.jpg its_express_rev_1.4_004001.jpg its_express_rev_1.4_004007.jpg its_express_rev_1.4_004001.jpg